Twin Circuit Breaker

Ford Courier

Background

The Courier was manufactured by Toyo Kogyo (Mazda), and imported and sold by Ford Motor Company as a response to the unforeseen popularity of the small Toyota and Nissan/Datsun pickups among young buyers in the West. Like the other mini-pickups of the time, it featured a sub-2 liter four cylinder engine, a four speed manual transmission, rear wheel drive, an impressive load capability of 1,400 lb (635 kg) considering its size, and a fairly large price tag compared to full size pickups of the time.

To circumvent the 25% Chicken tax on light trucks, Couriers (as with Chevrolet LUV's) were imported in "cab chassis" configurations, which included the entire light truck, less the cargo box or truck bed and were only subject to a 4% tariff. Subsequently, a truck bed would be attached to the chassis and the vehicle could be sold as a light truck.

1st generation (1972-1976)

The first generation Ford Courier was introduced in 1972 and sold for a little over $2,000 when introducedlose to the price of an F-100.

When the Courier was introduced it came standard with a 1.8 liter overhead cam engine, which produced 74 hp (55 kW) at 5070 rpm, and 92 lbft (125 Nm) at 3500 rpm. A 4-speed manual transmission was standard, and there was also a 3-speed automatic option (the 5-speed manual option came in 1976).

The body styling was effectively that of the related Mazda B-series, however its frontal treatment was unique, with a grille designed to emulate the larger Ford F-series, and large single headlights, instead of the B-series' smaller twin units.

Badging changed a few times in the first-gen series. In 1972, the tailgate read "FORD COURIER" in large raised letters, with a small "COURIER" badge on the front of the hood (from '73 on through '76 the hood badging read "FORD"). In '73 the tailgate read "COURIER" in large letters, with a small "FORD" badge on the upper left. In '74 it read "FORD" in large letters, with a small "COURIER" badge on the lower right. In 1976 the cab was lengthened 3 inches, and the grille received added trim.

2nd generation (1977-1982)

In 1977 the Courier was redesigned, and a host of new options was available. The truck was available with front disc brakes, as well as a Ford built 2.3 liter engine option (which was the same as that of the Ford Pinto and Mustang II). The key identifying feature of the Courier from Mazda's B-Series was still the singular headlights, although with park and indicator lights placed inset starting in '78 ('77s still had the turn signal lights in the bumper).

In 1979 the base model engine was increased in size to 2.0 liters (120.1 CID). The optional Ford 2.3 L (~140 cu in) engine was produced in Brazil.

The Courier continued to be sold until 1982, in which year power steering was added. For 1983, Ford introduced its own Ford Ranger to fill its compact truck segment, which replaced the Courier in the U.S. and Canadian markets.

A Ford Fiesta-based Courier pickup, smaller than the Ranger, is currently sold in Mexico.

Ford Courier variants

Diesel variants

The Ford Courier was never available with a diesel engine in the US. However, the 1980 Mazda B2200 was available with a Perkins-built 4.135 (4 cylinder, 135 CID) 2.2 liter diesel engine, producing 66 hp (49 kW) at 2,100 rpm. This same diesel engine was available in the 1983 and 1984 Ford Ranger, however it was replaced by the Mitsubishi 4D55T 2.3 liter Turbo Diesel (also used in Mitsubishi's own Mighty Max and the Dodge Ram 50) for the 1985 to 1987 Ford Rangers.[citation needed]

Electric variants

Between 1979 and 1982 a number of electric Ford Couriers were produced - Jet Industries purchased "vehicle gliders" (Ford Courier bodies minus their engines), and put in a series DC motor and lead acid batteries, to produce the Jet Industries ElectraVan 750.

These were sold mainly for service trucks, general to local government departments. They had a top speed around 70 mph (113 km/h), and would go 50 to 60 miles (97 km) on a full charge. A number of these vehicles still exist, usually with upgraded motor control systems and higher voltage battery packs.

Body conversions

A number of Couriers were sold as cab-chassis units, with rear decking. These were commonly fitted with rear utility bodies, flatbed decks, box truck bodywork, camper bodies or "stepside" deckbeds.

Engine conversions

While the Courier's engine bay was always fitted with inline 4-cylinder motors at the factory, owners have fitted larger engines into their Couriers, notably Ford V6 and smallblock V8 units. To cope with the increase in power new drivelines generally are also fitted.

Suspension conversions

The Ford Courier was never available as an OEM 4 wheel drive version in the US (the Mazda B-series didn get 4 wheel drive until 1986). However, there were several companies doing 4x4 conversions of the Ford Courier by adding a transfer case and solid front axle beginning in 1975 . From 1975 to 1979 Northwest ATV in Kelso Washington converted about 1500 Couriers to 4WD, which were sold as the Ford Courier Sasquatch, in the WA, OR, CA, and ID markets only. (Ford Sasquatch brochure). Other conversions of early 80's Couriers were done by other companies as well.

Other Ford models using the Courier name

There are four other distinct Ford vehicle lines which have used the Courier name:

American Ford Courier (Full-size US Ford wagon based : 1952-1960)

This was a commercial model based on Ford's full-size stationwagon line. Its model code was designated 78A.

From 1952 to 1956 access to the rear storage area was through a unique door hinged on the side. For 1957 and 1958, the rear access door was a combination of the lift gate and tailgate being connected with two connecting struts. This design meant that the rear door back glass had to be divided into three sections, two outer curved portions and a center piece.

In 1959 all Couriers took on the windowed body style very similar to the Tudor Ranch Wagons and their model code was re-designated as 59E. The last year for the passenger car based Courier would be 1960 when it would remain a commercial wagon.

European Ford Courier Van (Ford Fiesta based : 19912002)

Ford Courier Van

A Ford Courier Van based on the Ford Fiesta was launched in Europe in 1991. Based on the Mark III Fiesta platform, it was also produced in the 1995 Mark IV version. It was replaced in 2002 by the Ford Transit Connect.

Brazilian Ford Courier Pickup (Ford Fiesta based : 1998resent)

The name was also applied to a small pickup truck of similar layout produced by Ford in Brazil and exported to countries such as Mexico. It is based on the 1998 model of the Ford Fiesta. While its frontal treatment is the same as the South African built Fiesta based Ford Bantam "bakkie" pickup, it has a completely different load box.

Its load capacity is 700 kg (1,543 lb). The Mk IV 1.4 16v Zetec-SE has a top speed of 170 km/h (106 mph) and can accelerate from 0100 km/h (062 mph) in 12s. The Mk V 1.6 8v Zetec-Rocam model has top speed of 180 km/h (112 mph) and can accelerate from 0-100 km/h in 10 seconds.

Asia, Australia and New Zealand Ford Courier Pickup (Mazda B-Series based : 19782006)

The release of the 19971999 B-Series based Courier in Southeast Asia marked the entry of Ford and Mazda into the region's personal pickup truck market. The Courier was eventually replaced by a similarly Mazda-based Ford Ranger.

In Australia and New Zealand, the Courier was a compact pick-up built for Ford by Mazda in Japan. It was first offered on the Australian market in 1979 .

While it was discontinued in the USA and Canada in 1982 with the introduction of the Ford Ranger, the Courier continued in Asia, Australia and New Zealand as a badge-engineered[citation needed] version of the Mazda B-Series. It is currently built by AutoAlliance in Thailand. From 1991 to 1997 a badge engineered version of the Mazda Proceed Marvie was sold as the Ford Raider. Like the Mazda version, it was an SUV/MPV based on the Proceed/B-Series/Ranger/Courier.

Confusingly, the same Ford Courier is now called the Ford Ranger in every other market outside Canada and the US, including Australia and New Zealand. The vehicle is unrelated to the American Ranger, however, and it remains to be seen whether Ford decides to replace the American Ranger after its scheduled 2009 departure.

References

^ Rechtin, Mark (December 21, 2009). "For Mazda and Ford, breaking up is hard to do". Automotive News. http://www.autonews.com/apps/pbcs.dll/article?AID=/20091221/OEM03/312219988/1144#. Retrieved 2010-01-03. 

^ "Ending the "Chicken War": The Case for Abolishing the 25 Percent Truck Tariff". freetrade.org, by Daniel Ikenson. http://www.freetrade.org/pubs/briefs/tbp-017es.html. 

^ Ford Courier page at www.ford.com.mx

^ David Boyce, What Car Is That? in Australia and New Zealand, 1981, page76

^ Green Book Price & Model Guide, July-August 1983, page 99

^ Australian Car Guide - Ford Raider 4WD Retrieved on 30 December 2009

^ SEVS eligibility Mazda Proceed

External links

Ford Courier Collector

Ford Courier at flickr.com

v  d  e

Ford Motor Company light truck timeline, United States and Canada, 1980sresent

Type

1980s

1990s

2000s

2010s

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

0

1

2

3

4

5

6

7

8

9

0

Mid-size crossover

Edge

Full-size crossover

Flex

Freestyle

Taurus X

Compact SUV

Bronco II

Escape

Escape

Mid-size SUV

Explorer

Explorer

Explorer

Explorer

Full-size SUV

Bronco

Expedition

Expedition

Expedition

Excursion

Expedition EL/Max

Compact pickup

Courier

Ranger

Ranger

Ranger

Ranger

Mid-size pickup

Explorer Sport Trac

Explorer Sport Trac

Full-size pickup

F-Series

F-Series

F-Series

F-Series

F-Series

F-Series

Super Duty

Super Duty

Minivan

Aerostar

Transit Connect

Windstar

Freestar

Van

Econoline

Econoline/E-Series

Categories: Ford vehicles | Pickup trucksHidden categories: All articles with unsourced statements | Articles with unsourced statements from August 2009 | Articles with limited geographic scope | Articles needing additional references from March 2009 | All articles needing additional references
About the Author

I am China Toys Suppliers writer, reports some information about air circuit breaker , portable sonar.

Need Electrician expertise.....?

My house circuit breaker box is full. All breakers are Square D, QO type, and all are 10A. They don't make twin breakers in 10A so I have to jump to another box or replace the box I have. What is the better course to take? All I know about my total amps is I have 25, 10 amp breakers.
Yes, there are some doubles in the box, obviously for the large loads. I will have to check on which ones, and if the main has total amps on it, but I don't think it does.
OK...I messed up. I wasn't reading the number on the end of the switch. Total amps are 200. Box has a mix of 15s, 20s, and 50s. Looks like I may be able to get twin breakers. Is that cheaper/better than adding a jump box?

What is your total house amperage, the amoung of amps coming into the house, thats the big switch on the top of the breaker box, the total amps for the whole house? This sounds like someone did know what they where doing or didn't want to pay for the larger breakers. You need to find a friend that is an electrician.

Overloaded wires